Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

how to include heat loss in insulated boundary

Posted 2010年9月2日 GMT+8 03:13 1 Reply

Adam Foong
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I have set the boundary condition as insulated, however, in real case, the insulation material is not ideal, heat loss is expected.
Hence, may I know how to include heat loss in boundary condition?

Thanks.
1 Reply Last Post 2010年9月2日 GMT+8 05:49
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010年9月2日 GMT+8 05:49
Hi

in which module and how do you loose your heat ? by radiation, convection or conduction ? you have different variables depending on T^4, (T-Tref) or DT for the different cases. Check the doc, and try out a few examples in the HT module

--
Good luck
Ivar
Hi in which module and how do you loose your heat ? by radiation, convection or conduction ? you have different variables depending on T^4, (T-Tref) or DT for the different cases. Check the doc, and try out a few examples in the HT module -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content