Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

node numbering

Please login with a confirmed email address before reporting spam

Does anyone know in what order the nodes are numbered in a mapped mesh in COMSOL, or where in the documentation node numbering conventions are explained?

I would like to do some post processing using the stiffness matrix, but can't figure which entry corresponds to which degree of freedom.

Thanks for the help!

1 Reply Last Post 2010年9月8日 GMT-4 01:35
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010年9月8日 GMT-4 01:35
Hi

I have never found that in the doc, but you can learn by starting with simple examples.

I mostly define groups in the GUI and then resolve the group indexes to identify the nodes, it was somewhat heavy but possible in 3.5 (there are several discussions and some code here try a search on the forum) . Still have to redo all this in V4 ;)

--
Good luck
Ivar
Hi I have never found that in the doc, but you can learn by starting with simple examples. I mostly define groups in the GUI and then resolve the group indexes to identify the nodes, it was somewhat heavy but possible in 3.5 (there are several discussions and some code here try a search on the forum) . Still have to redo all this in V4 ;) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.