Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
change space dimension from 2D to 3D while preserving model builder
Posted 2015年10月16日 GMT-4 12:49 Version 5.1 1 Reply
Please login with a confirmed email address before reporting spam
let say, if I have already build a model in comsol with parameters and definitions and physics so on.
1) is it possible to change spatial dimension from from 2D to 3D? while preserving all the parameters or definitions in model builder.
Note: I can do save as, but I can not change 2D to 3D for same model builder
thanks
JK
1) is it possible to change spatial dimension from from 2D to 3D? while preserving all the parameters or definitions in model builder.
Note: I can do save as, but I can not change 2D to 3D for same model builder
thanks
JK
1 Reply Last Post 2015年11月13日 GMT-5 11:40
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Hello JK,
You can certainly add a 3D component to a model that already contains a 2D component. You can then use Insert Sequence to bring into a workplane of the 3D geometry the same geometry that is in your 2D compnent. After that, you can extrude or revolve that shape into a 3D object, etc.
Best,
Jeff
You can certainly add a 3D component to a model that already contains a 2D component. You can then use Insert Sequence to bring into a workplane of the 3D geometry the same geometry that is in your 2D compnent. After that, you can extrude or revolve that shape into a 3D object, etc.
Best,
Jeff