Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Detecting connection to COMSOL from Matlab
Posted 2009年9月28日 GMT-4 10:41 1 Reply
Please login with a confirmed email address before reporting spam
Hi,
I'm wondering if anybody have a quick way of detecting wether Matlab was started with COMSOL or not. This detection is to be used such that in case no COMSOL connection exists an error message is produced, otherwise the code execution continues without any COMSOL window opening or other delay.
Best regards
Lars Ottar Kvale
I'm wondering if anybody have a quick way of detecting wether Matlab was started with COMSOL or not. This detection is to be used such that in case no COMSOL connection exists an error message is produced, otherwise the code execution continues without any COMSOL window opening or other delay.
Best regards
Lars Ottar Kvale
1 Reply Last Post 2009年9月30日 GMT-4 03:16
Please login with a confirmed email address before reporting spam
Posted:
2 decades ago
Hi,
I found that issuing the following line will not use much time or start anything when a COMSOL connection is functional, and of course will produce an error otherwise, which makes it usable as a COMSOL connection test;
>>com.femlab.server.StartFemlab.getArgs
Cheers
Lars Ottar
I found that issuing the following line will not use much time or start anything when a COMSOL connection is functional, and of course will produce an error otherwise, which makes it usable as a COMSOL connection test;
>>com.femlab.server.StartFemlab.getArgs
Cheers
Lars Ottar