Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Force per unit length or area
Posted 2015年11月11日 GMT-5 06:13 RF & Microwave Engineering, Structural Mechanics Version 5.0 2 Replies
Please login with a confirmed email address before reporting spam
Dear all
From a solution of 2D structure I get Maxwell stress tensor over a boundary, which I further want to apply, in a separate problem but on the same 2D structure and boundary, (using solid mechanics) as boundary load.
What I'm not sure is that: to apply this force distribution ''per unit length'' or ''per unit area''?
Cheers,
Can
From a solution of 2D structure I get Maxwell stress tensor over a boundary, which I further want to apply, in a separate problem but on the same 2D structure and boundary, (using solid mechanics) as boundary load.
What I'm not sure is that: to apply this force distribution ''per unit length'' or ''per unit area''?
Cheers,
Can
2 Replies Last Post 2015年11月12日 GMT-5 02:33
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Hi
check the units of your variable from the first "physics" the you will know ;)
Normally by default COMSOL works in densities per volume on Domains, per surface over Boundaries, but then in 2D and 1D respectively you need to correct for the loss of one dimension, generally in 2D its per "1m" depth, and in 1D per 1m^2 normal area for input, but the output results remain mostly as densities similar to 3D (there are some exceptions).
That is why it is so handy that COMSOL is systematic with units, provided you have been systematic by entering the units too ;)
--
Good luck
Ivar
check the units of your variable from the first "physics" the you will know ;)
Normally by default COMSOL works in densities per volume on Domains, per surface over Boundaries, but then in 2D and 1D respectively you need to correct for the loss of one dimension, generally in 2D its per "1m" depth, and in 1D per 1m^2 normal area for input, but the output results remain mostly as densities similar to 3D (there are some exceptions).
That is why it is so handy that COMSOL is systematic with units, provided you have been systematic by entering the units too ;)
--
Good luck
Ivar
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Hi Ivar,
Thanks for reminding, I agree that sometimes I confuse more than I need :)
Cheers,
Can
Thanks for reminding, I agree that sometimes I confuse more than I need :)
Cheers,
Can