Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Cracks in a 3D plate

Posted 2015年12月1日 GMT-5 17:25 2 Replies

Nick Bosco
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I'd like to create a model of two plates laminated to one another, where one of the plates has many cracks in a plane perpendicular to the plane of the plates. For instance if you laminate a plate of glass to a plate of steel, then bent the laminate cracking the glass.

Any suggestions on how to accomplish this?

Thanks in advance.
2 Replies Last Post 2016年2月16日 GMT-5 21:00
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2015年12月2日 GMT-5 02:27
Hi,

It seems to me that you need a damage model, similar to the one discussed by my colleague Ed Gonzalez in a blog post yesterday:

www.comsol.se/blogs/accessing-external-material-models-for-structural-mechanics/

Regards,
Henrik
Hi, It seems to me that you need a damage model, similar to the one discussed by my colleague Ed Gonzalez in a blog post yesterday: https://www.comsol.se/blogs/accessing-external-material-models-for-structural-mechanics/ Regards, Henrik
Maizuar Maizuar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2016年2月16日 GMT-5 21:00
Hi Nick

Have you solved your problem. I have similar problem, so that you could please share me your works. Many thanks for your helps.


regards



Maizuar
Hi Nick Have you solved your problem. I have similar problem, so that you could please share me your works. Many thanks for your helps. regards Maizuar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content