Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Moving solid particles in a laminar flow

Posted 2015年12月2日 GMT-5 09:03 Fluid & Heat, Modeling Tools & Definitions, Parameters, Variables, & Functions, Studies & Solvers Version 5.2 3 Replies

Seyedehyasamin Salamat
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I want to simulate moving solid particles in a laminar flow with some obstacles (vertical columns) in their way. What I want to see is that how they get trapped in the gaps between the columns (when the diameter of the spheres is larger than the gaps). I have tried the Particle Tracing module, but it doesn't consider the particles as real rigid bodies. I mean even if I set the diameter of the particles higher than the gap space, the particles still pass through. The only thing that changing the diameter would affect is the velocity of the particles. I was wondering if there is any way that I can make these particles as real rigid spheres, so when they are larger than the space between the columns, they will not pass and get trapped there.

Thank you so much,
Yasamin
3 Replies Last Post 2016年3月2日 GMT-5 01:41
COMSOL Moderator

Hello Seyedehyasamin Salamat

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Abdulgani Alsaç
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2016年3月1日 GMT-5 10:35
hi Seyedehyasamin,
i have same problem, did you find a solution to your problem?
if you find a solution for your problem, can you help me about it?

thanks
Abdulgani
hi Seyedehyasamin, i have same problem, did you find a solution to your problem? if you find a solution for your problem, can you help me about it? thanks Abdulgani
Seyedehyasamin Salamat
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2016年3月1日 GMT-5 15:31
Hi Abdulgani,

Actually we weren't able to do what we wanted to do with Particle Tracing. This module of COMSOL doesn't consider particles as rigid spheres, and changing the diameter, just changes the velocity of the particles in the flow. For doing that, I think you need to use the two phase flow or fluid structure interaction.

Yasamin
Hi Abdulgani, Actually we weren't able to do what we wanted to do with Particle Tracing. This module of COMSOL doesn't consider particles as rigid spheres, and changing the diameter, just changes the velocity of the particles in the flow. For doing that, I think you need to use the two phase flow or fluid structure interaction. Yasamin
Abdulgani Alsaç
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2016年3月2日 GMT-5 01:41
thanks for sharing your experience Yasemin.
thank you so much.

Abdulgani
thanks for sharing your experience Yasemin. thank you so much. Abdulgani

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content