了解多物理场仿真在基础研究和产品设计中的应用

各个行业的工程师和科研人员都在使用多物理场仿真来研发创新的产品设计和流程。他们在 COMSOL 用户年会上展示了丰富的技术论文和演示文稿,您可以从他们的研究成果中寻找灵感。

使用左侧【快速搜索】工具查找您感兴趣的研究,或按照应用领域进行筛选。


查看 COMSOL 用户年会 2019 论文
2014 - Cambridgex

Rheological Behaviour of Single–Phase Non-Newtonian Polymer Solution in Complex Pore Geometry: A Simulation Approach

P. Idahosa[1], G. Oluyemi[2], R. Prabhu[2], B. Oyeneyin[2]
[1]IDEAS Research Institute/School of Engineering, Robert Gordon University, Aberdeen, United Kingdom.
[2]School of Engineering, Robert Gordon University, Aberdeen, United Kingdom.

One of the most important criteria for evaluating chemical enhanced oil recovery (EOR) processes that use ... 扩展阅读

Modeling and Simulation of Membrane Contactor Employed to Strip CO2 from Rich Solvents via COMSOL Multiphysics® new

N. Ghasem[1], M. Al-Marzouqi[1], N. A. Rahim[1]
[1]United Arab Emirates University, Al-Ain, United Arab Emirates

A mathematical model is developed for the stripping of CO2 from rich solvent. The rich solvent (aqueous NaOH) ... 扩展阅读

3D Multiphysics Modeling of Bulk High-Temperature Superconductors for Use as Trapped Field Magnets new

M. Ainslie[1], J. Zou[1], D. Hu[1], D. Cardwell[1]
[1]Department of Engineering, University of Cambridge, Cambridge, UK

The authors are currently investigating the use of bulk high temperature superconductors as trapped field ... 扩展阅读

Modeling the ELENA Electron Cooler with COMSOL Multiphysics® Software new

G. Tranquille[1]
[1]CERN, Geneva, Switzerland

ELENA is a small cooler decelerator ring at CERN which will be built to increase substantially the number of ... 扩展阅读

Modeling an Adsorption Process in a Shell-and-Tube-Heat-Exchanger-Type Adsorber new

G. Salazar Duarte[1], B. Schürer[1], C. Voss[1], D. Bathen[2]
[1]Linde AG, Munich, Germany
[2]Universität Duisburg-Essen, Duisburg, Germany

Pressure Swing Adsorption (PSA) and Temperature Swing Adsorption (TSA) are commonly used for separation ... 扩展阅读

An Automatic Modeling Approach for Optimized Positioning of an Electrostimulative Implant in the Human Femoral Head new

Y. Su[1], D. Kluess[1], W. Mittelmeier[1], M. Ellenrieder[1], U. van Rienen[2], R. Bader[1]
[1]Department of Orthopaedics, University of Rostock, Rostock, Germany
[2]Institute of General Electrical Engineering, University of Rostock, Rostock, Germany

Introduction Electromagnetic stimulation is a common therapy to support bone healing in cases of avascular ... 扩展阅读

Solid Oxide Fuel Cell Material Structure Grading in the Direction Normal to the Electrode/Electrolyte Interface Using COMSOL Multiphysics® new

M. Andersson[1], B. Sundén[1]
[1]Department of Energy Sciences, Lund University, Lund, Sweden

Fuel cells (FCs) are promising as an energy producing device, which at this stage of development will require ... 扩展阅读

Optimization of Architectured Structures in Building for Harness, Storage, and Release of Energy new

C. Thoumyre[1], P. Lhuissier[1], L. Salvo[1], G. Bienvenu[2], M. Kermarrec[2]
[1]University Grenoble Alpes, SIMaP, Grenoble, France
[2]Hevatech, Ville-la-Grand, France

The problem of storage, and release of thermal energy is an important challenge in various industrial fields. ... 扩展阅读

Pore-Level Influence of Contact Angle on Fluid Displacements in Porous Media new

H. Ali Akhlaghi Amiri[1]
[1]University of Stavanger, Stavanger, Norway

Wettability affects two-phase displacements in porous media by determining the microscopic distribution of ... 扩展阅读

Acoustic-Structure Interaction Simulation of a Differential Phase Sensor new

J. H. Lee[1]
[1]Department of Mechanical Engineering, American University of Sharjah, Sharjah, UAE

The idea of application as a hearing device based on a parasitoid fly, Ormia ochracea has been studied ... 扩展阅读

第一页
上一页
1–10 of 205