了解多物理场仿真在基础研究和产品设计中的应用

各个行业的工程师和科研人员都在使用多物理场仿真来研发创新的产品设计和流程。他们在 COMSOL 用户年会上展示了丰富的技术论文和演示文稿,您可以从他们的研究成果中寻找灵感。

使用左侧【快速搜索】工具查找您感兴趣的研究,或按照应用领域进行筛选。


查看 COMSOL 用户年会 2020 论文

Batteries, Fuel Cells, and Electrochemical Processesx

The Fast Model for Ionic Wind Simulation

A. Samusenko[1], Yu. Stishkov[1], P. Zhidkova[1]
[1]Saint Petersburg State University, Research and Educational Center “Electrophysics”, St Petersburg, Russia

Ionic wind is the gas flow induced by the corona discharge. Ions produced by corona are accelerated by ... 扩展阅读

Reverse Electrodialysis Process with Seawater and Concentrated Brines: a COMSOL Multiphysics® Model for Equipment Design

M. Tedesco[1], A. Cipollina[1], C. Scavuzzo[1], A. Tamburini[1], G. Micale[1]
[1]Dipartimento di Ingegneria Chimica, Gestionale, Informatica, Meccanica (DICGIM), Università di Palermo (UNIPA), Palermo, Italy

Salinity Gradient Power (SGP) is a promising renewable energy source associated to the controlled mixing of ... 扩展阅读

Hierarchical Modeling of Polymer Electrolyte Membrane Fuel Cells

J. Dujc[1], J.O. Schumacher[1]
[1]Zurich University of Applied Sciences (ZHAW), Institute of Computational Physics (ICP), Winterthur, Switzerland

A finite element model of a polymer electrolyte membrane fuel cell (PEMFC) is described in this paper. We ... 扩展阅读

FEM Based Studies of a Mg/Al Hybrid Component Joint Regarding Corrosion Prediction

D. Höche[1]
[1]Helmholtz-Zentrum Geesthacht, Germany

The model can be utilized for a virtual design of a hybrid joint interms of corrosion prevention. Structures ... 扩展阅读

Analysis of Electro-Thermal Hot Spot Formation in Li-Ion-Battery-Cells

W. Beckert[1], C. Freytag[1], T. Frölich[1], G. Fauser[1]
[1]Fraunhofer IKTS, Dresden, Germany

The presented model approach offers a computational efficient tool to analyze the influences of geometrical ... 扩展阅读

Advanced 3D Imaging Coupled to Modeling of Fuel Cell and Battery Electrodes

F. Tariq[1], V. Yufit[1], M. Marinescu[1], G. Cui[1], M. Kishimoto[1], N. Brandon[1]
[1]Imperial College London, London, United Kingdom

Solid Oxide Fuel Cells (SOFC) and Li-ion batteries (LIB) are electrochemical devices where performance is ... 扩展阅读

Modelling of a 5 Cell Intermediate Temperature Polymer Electrolyte Fuel Cell (IT-PEFC) Stack: Analysis of Flow Configuration and Heat Transfer

A.S. Chandan[1], A. Mossadegh Pour[2], R. Steinberger-Wilckens[2]
[1]Centre for Hydrogen and Fuel Cell Research, University of Birmingham, Birmingham, United Kingdom
[2]University of Birmingham, Birmingham, United Kingdom

Polymer Electrolyte Fuel Cells (PEFCs) are a key technology in the advancement of society towards a low ... 扩展阅读

Modeling the Vanadium Oxygen Fuel Cell

F.T. Wandschneider[1], M. Küttinger[1], P. Fischer[1], K. Pinkwart[1], J. Tübke[1], H. Nirschl[2]
[1]Fraunhofer-Institute for Chemical Technology, Pfinztal, Germany
[2]Karlsruhe Institute for Technology, Karlsruhe, Germany

A two-dimensional stationary model of a vanadium oxygen fuel cell is developed in COMSOL Multiphysics®. This ... 扩展阅读

2D Axisymmetric Simulation of the Electrochemical Finishing of Micro Bores by Inverse Jet Electrochemical Machining

M. Hackert-Oschätzchen[1], M. Kowalick[1], G. Meichsner[2], A. Schubert[1], B. Hommel[3], F. Jähn[3], M. Scharrnbeck[4], R. Garn[5], A. Lenk[5]
[1]Professorship Micromanufacturing Technology, Technische Universität Chemnitz, Chemnitz, Germany
[2]Fraunhofer Institute for Machine Tools and Forming Technology, Chemnitz, Germany
[3]SITEC Industrietechnologie GmbH, Chemnitz, Germany
[4]SITEC Automation GmbH, Chemnitz, Germany
[5]Continental Automotive GmbH, Limbach-Oberfrohna, Germany

In this study the inverse Jet-ECM process of micro bores is investigated by help of multiphysics simulations. ... 扩展阅读

The Effect of Electrolyte Flow Slots in Tooling Electrodes on Workpiece Surface Finish in Electrochemical Machining

B. Bingham[1]
[1]Oregon State University, Corvallis, OR, USA

Electrochemical machining (ECM) uses electrolysis to precisely remove material at high rates. ECM has many ... 扩展阅读