论文和技术资料

快速搜索

技术资料

白皮书

了解多物理场仿真在基础研究和产品设计中的应用

各个行业的工程师和科研人员都在使用多物理场仿真来研发创新的产品设计和流程。他们在 COMSOL 用户年会上展示了丰富的技术论文和演示文稿，您可以从他们的研究成果中寻找灵感。

使用左侧【快速搜索】工具查找您感兴趣的研究，或按照应用领域进行筛选。

查看 COMSOL 用户年会 2024 论文

搜索：

Studying PEM Fuel Cells using Equation Based Simulation

J. Blackburn [1], N. McCartney [1],
[1] National Physical Laboratory, London, UK

We present computer simulation results for PEM fuel cells using COMSOL Multiphysics® software. We have ... 扩展阅读

Modeling of Radial Source Flow in Porous Media: Miscible Viscous Fingering Patterns

V. Sharma [1], S. Pramanik [2], M. Mishra [1],
[1] Indian Institute of Technology Ropar, Rupnagar, India
[2] Indian Institute of Technology Ropar, Rupnagar, India; Nordita, SE-10691 Stockholm, Sweden.

COMSOL Multiphysics® software was used to model radial source flow in two dimensional homogeneous porous ... 扩展阅读

Large Scale Outdoor Flammable & Toxic Gas Dispersion Modelling in Industrial Environments

A. Hallgarth[1], A. Zayer[1], A. Gatward[2], and J. Davies[2]

[1]Hazard Research & Risk Consultants Ltd, Aberystwyth, Wales, United Kingdom
[2]Independent Consultants, United Kingdom

HazRes has developed a gas discharge and dispersion model in COMSOL which takes into account the effects of ... 扩展阅读

Modeling and Simulation of Drug Release through Polymer Matrices

V. Runkana[1], A. Pareek[1], P. Arora[2]
[1]Tata Consultancy Services, Pune, Maharashtra, India
[2]Indian Institute of Technology Delhi, New Delhi, Delhi, India

Limited drug efficacy, undesirable temporal changes in drug concentration and patient non-compliance due to ... 扩展阅读

Multiphysics Simulation of REMS hot-film Anemometer Under Typical Martian Atmosphere Conditions

L. Kowalski, L.C. Muñoz, M.D. Pumar, and V.J. Serres
Universidad Politécnica de Cataluña, Departamento de Ingeniería Electrónica, Barcelona, Spain

The purpose of this paper is to describe numerical electro-thermal simulations of the REMS wind sensor unit ... 扩展阅读

Modeling of Galvanic Interactions between AA5083 and Steel under Atmospheric Condition

D. Mizuno, Y. Shi, and R. Kelly
University of Virginia
Charlottesville, VA

Aluminum alloys 5000 series are widely used within the cabins of ships. These aluminum alloys are often ... 扩展阅读

Microvascular Dysfunction in PAD Patients

K. Cluff[1], H. Mehraein[1], B. Jayakumar[2]
[1]Department of Bioengineering, Wichita State University, Wichita, KS, USA
[2]Department of Industrial & Manufacturing Engineering, Wichita State University, Wichita, KS, USA

Background: Peripheral arterial disease (PAD) is characterized by atherosclerotic blockages of the arteries ... 扩展阅读

Numerical Analysis of Heating and Ablating Non-Pyrolitic Materials

A. Davidy
IMI
Ramat-Hasharon
Israel

In this paper a two dimensional time dependent model is developed and assessed to describe the interrelated ... 扩展阅读

Fluid-Structure Interaction Modeling for an Optimized Design of a Piezoelectric Energy Harvesting MEMS Generator

I. Kuehne[1], A. van der Linden[2], J. Seidel[1], M. Schreiter[1], L. Fromme[2], and A. Frey[1]
[1]Siemens AG, Corporate Research & Technologies, Munich, Germany
[2]Comsol Multiphysics GmbH, Göttingen, Germany

This paper reports the design of a piezoelectric energy harvesting micro generator for an energy autonomous ... 扩展阅读

Electrical Characterization of Biological Cells on Porous Substrate Using COMSOL Multiphysics®

D. Mondal[1], C. RoyChaudhuri[1]
[1]Department of Electronics and Telecommunication Engineering, Bengal Engineering and Science University, Howrah, West Bengal, India

In this paper, the gross electrical characterization of biological cells on porous substrate is analyzed ... 扩展阅读

第一页

251–260 of 310

最后一页