了解多物理场仿真在基础研究和产品设计中的应用

各个行业的工程师和科研人员都在使用多物理场仿真来研发创新的产品设计和流程。他们在 COMSOL 用户年会上展示了丰富的技术论文和演示文稿,您可以从他们的研究成果中寻找灵感。

使用左侧【快速搜索】工具查找您感兴趣的研究,或按照应用领域进行筛选。


查看 COMSOL 用户年会 2019 论文

Microwave Heating Simulation of Frozen Pie

F. Chen[1], T. Gulati[1], H. Zhu[1], A. K. Datta[1]
[1]Cornell University, Ithaca, NY, USA

This research studies the thermal effect of frozen pie heating in the microwave oven. Considering as ... 扩展阅读

Embedded Microfluidic/Thermoelectric Generation System for Self-Cooling of Electronic Devices

R. Kiflemariam[1], H. Fekramandi[1], C. Lin[1]
[1]Department of Mechanical & Materials Engineering, Florida International University, Miami, FL, USA

A 3D electro-conjugate heat transfer model was made to study an embedded microfluidic/TEG system (μF/TEG) ... 扩展阅读

Study & Modeling of 'Acoustic Matching Layers' for Ultrasound Imaging Probes Through Pulse-Echo FEM Simulation

L. Spicci[1]
[1]Esaote SpA, Florence, Italy

Ultrasound Imaging probes are specific devices that require a very detailed design of acoustic impedance ... 扩展阅读

Modeling the Effect of Headspace Steam on Microwave Heating of Mashed Potato

J. Chen[1], K. Pitchai[1], D. Jones[1], J. Subbiah[1]
[1]University of Nebraska-Lincoln, Lincoln, NE, USA

Introduction: Domestic microwave ovens are widely used to heat food products, because of rapid and convenient ... 扩展阅读

COMSOL Multiphysics® Simulation of 3D Single-Phase Transport in a Random Packed Bed of Spheres

A. Dixon[1]
[1]Department of Chemical Engineering, Worcester Polytechnic Institute, Worcester, MA, USA

Packed beds are important in the chemical industries. Computational fluid dynamics (CFD) can simulate ... 扩展阅读

Modeling of Packed Bed Reactors: Hydrogen Production by the Steam Reforming of Methane and Glycerol

A. Dixon[1], B. MacDonald[1], A. Olm[1]
[1]Department of Chemical Engineering, Worcester Polytechnic Institute, Worcester, MA, USA

The conventional route to hydrogen production is by steam reforming of methane (MSR) in a multitubular packed ... 扩展阅读

Optimization of Acoustic Silencer for the Screw Compressor System

M. Swamy[1], L. J. van Lier[1], J. Smeulers[1]
[1]TNO, Delft, The Netherlands

In one of the screw compressor system, designed silencer was not optimal. A great challenge was the large ... 扩展阅读

Fresh Produce Safety During Hydrocooling: An Engineering Model

A. Warning[1], A. K. Datta[1]
[1]Department of Biological & Environmental Engineering, Cornell University, Ithaca, NY, USA

Hydrocooling is the process by which warm produce is chilled with water. The chilling of warm produce ... 扩展阅读

Numerical and Experimental Studies of a Capillary Channel

M. Xu[1], Z. Wu[1], X. Wang[1]
[1]Tsinghua University, Beijing, China

Capillary effects are common in microfluidics due to large surface-to-volume ratio of flows inside ... 扩展阅读

Simulation of Cellular Traction Force Based Deflection of PDMS Micropillars

J. Wala[1], D. Maji[1], S. Dhara[1], S. Das[1]
[1]Indian Institute of Technology Kharagpur, Kharagpur, West Bengal, India

Cells are complex entities which not only passively sense external stimuli (viz. chemical, optical or ... 扩展阅读