了解多物理场仿真在基础研究和产品设计中的应用

各个行业的工程师和科研人员都在使用多物理场仿真来研发创新的产品设计和流程。他们在 COMSOL 用户年会上展示了丰富的技术论文和演示文稿,您可以从他们的研究成果中寻找灵感。

使用左侧【快速搜索】工具查找您感兴趣的研究,或按照应用领域进行筛选。


查看 COMSOL 用户年会 2020 论文

Structural Mechanics and Thermal Stressesx

Evaluation of Low-Cycle-Fatigue Life of Solder Joints in Surface Mounting Power Devices by Finite Element Modeling

N. Delmonte[1], F. Giuliani[1], M. Bernardoni[2], P. Cova[1]
[1]Dipartimento di Ingegneria dell'Informazione, Università degli Studi di Parma, Parma, Italy
[2]CDTR - Centre for Device Thermography and Reliability, H. H. Wills Dept. of Physics, University of Bristol, Bristol, United Kingdom

The reliability of solder joints [1,2] is one of the key factors in the determination of the reliability of ... 扩展阅读

Structural Analysis of a Pressure Sensor for High Temperature Environments

S.V. De Guido[1], G.S. Masi[1], P. Vladimirovich Miodushevsky[1], L. Vasanelli[1]
[1]Department of Innovation Engineering, University of Salento, Lecce, Italy

Pressure sensors operating at the temperature higher that 500 °C are absent in the world market. Our goal is ... 扩展阅读

Optimal Placement of Piezoelectric Plates to Control Multimode Vibrations of Rotating Beam

F. Botta[1], D. Dini[2], S. Gentili[1], G. Cerri[1]
[1]Dipartimento di Ingegneria Meccanica e Industriale, Università degli Studi di Roma Tre, Roma, Italy
[2]Department of Mechanical Engineering, Imperial College London, London, United Kingdom

Turbomachines blades are forced by a load resulting from the interaction with the fluid. The consequent ... 扩展阅读

Modeling the Temperature-Dependent Dynamic Behavior of a Timber Bridge with Asphalt Pavement

B. Weber[1]
[1]Empa, Swiss Federal Laboratories for Materials Science and Technology, Dübendorf, Switzerland

The fundamental frequency and the corresponding damping value are the main design parameters for footbridges ... 扩展阅读

Elasto-Plastic FEM Models Explain the Emplacement of Shallow Magma Intrusions in Volcanic Complexes

A. Bistacchi[1]
[1]Università degli Studi di Milano Bicocca, Milano, Italy

We present numerical models and field data that aid understanding of volcano-tectonic processes related to ... 扩展阅读

Modeling of the Photo-Mechanical Response of Liquid-Crystal Elastomers

G. Cerretti[1], J.-C. Gomez-Lavocat[1][2], K. Vynck[1], D.S. Wiersma[1][3]
[1]European Laboratory for Non-Linear Spectroscopy (LENS), University of Florence, Sesto Fiorentino, Italy
[2]The Institute of Photonic Sciences (ICFO), Mediterranean Technology Park, Castelldefels, Spain
[3]Istituto Nazionale di Ottica (INO), National Research Council (CNR), Florence, Italy

Liquid-crystal elastomers (LCEs) [1] have attracted a great attention in recent years due to their high ... 扩展阅读

Simulation of an Ultrasonic Immersion Test for the Characterization of Anisotropic Materials

A. Castellano[1], P. Foti[1], A. Fraddosio[1], S. Marzano[1], M.D. Piccioni[1], D. Scardigno[1]
[1]DICAR, Politecnico di Bari, Bari, Italy

Introduction: Improving the capability of nondestructive evaluations requires the analysis of suitable models ... 扩展阅读

An Innovative Solution for Water Bottling Using PET

D. Scardigno[1], A. Castellano[1], P. Foti[1], A. Fraddosio[1], S. Marzano[1], M.D. Piccioni[1]
[1]DICAR, Politecnico di Bari, Bari, Italy

Introduction: We study an innovative technology for water bottling using PET, aimed at reducing the thickness ... 扩展阅读

The Non Linear Behavior of the Microplane Model in COMSOL

A. Frigerio[1]
[1]RSE, Milano, Italy

The safety of large civil structures is often evaluated by means of numerical models based on the Finite ... 扩展阅读

A Parametric Study on the Dynamic Behavior of Cable Supported Bridges Under Moving Loads Affected by Accidental Failure Mechanisms

P. Lonetti[1], A. Pascuzzo[1], R. Sarubbo[1]
[1]Department of Structural Engineering, University of Calabria, Rende, Cosenza, Italy

The dynamic behavior of cable supported bridges subjected to moving loads and affected by corrosion and ... 扩展阅读