了解多物理场仿真在基础研究和产品设计中的应用


各个行业的工程师和科研人员都在使用多物理场仿真来研发创新的产品设计和流程。他们在 COMSOL 用户年会上展示了丰富的技术论文和演示文稿,您可以从他们的研究成果中寻找灵感。欢迎访问以下链接浏览精选文章,您也可以使用“快速搜索”工具来查找特定的演示文稿,或按应用领域进行过滤。
查看 COMSOL 用户年会 2018 论文集
Transport Phenomenax

Ammonia Removal From Water by a Liquid-Liquid Membrane Contactor Under a Closed Loop Regime

E. Licon[1], S. Casas[1], A. Alcaraz[1], J.L. Cortina[1], C. Valderrama[1]
[1]Universitat Politécnica de Catalunya, Barcelona, Spain

Ammonia separation from water by membrane contactor was simulated on transient state and compared with ... 扩展阅读

Modeling of Residual Stresses in a Butt-welded Joint with Experimental Validation

V. Srivastava [1],
[1] Naval Materials Research Laboratory (NMRL), Defence Research and Development Organization (DRDO), Ambernath, Thane, Maharashtra, India

2D-modeling of arc welding in butt-joint configuration was performed in this study considering thermal ... 扩展阅读

Non-isothermal Flow of CO2 in Injection Wells: Evaluation of Different Injection Modes

O. Silva [1],
[1] Amphos 21 Consulting S.L., Barcelona, Spain

Injection conditions of CO2 at the wellhead may play a major role on the flow behavior through the wellbore. ... 扩展阅读

Numerical Model for Predicting Heat and Mass Transfer Phenomena during Cake Baking

P. Le Bideau [1], R. Cutté [1], P. Glouannec [1], J. F. Le Page [2]
[1] Univ. Bretagne Sud, FRE CNRS 3744, IRDL, F-56100 Lorient, France
[2] DPP, ADRIA Développement, Quimper, France

A transient two-dimensional axisymmetric model is implemented in COMSOL Multiphysics® software to simulate ... 扩展阅读

Modeling of Hydrogel-Based Controlled Drug Delivery System for Breast Cancer Treatment new

K. Cluff[1], L. Saeednia[2], H. Mehraein [1], R. Asmatulu[2]
[1]Department of Bioengineering, Wichita State University, Wichita, KS, USA
[2]Department of Mechanical Engineering, Wichita State University, Wichita, KS, USA

Polymeric hydrogel is a promising class of drug delivery systems with the controlled release behavior in the ... 扩展阅读

CFD Analysis of a Printed Circuit Heat Exchanger

K. Wegman [1], X. Sun [1],
[1] Department of Mechanical and Aerospace Engineering, Ohio State University, Columbus, OH, USA

In this experiment, the performance of a Printed Circuit Heat Exchanger (PCHE) was studied using COMSOL ... 扩展阅读

Hydrodynamic Modeling of a Rotating Cone Pump Using COMSOL Multiphysics® Software

P. L. Mills [1], A. Uchagawkar [1], M. Vasilev [1],
[1] Texas A&M University - Kingsville, Kingsville, TX, USA

Introduction Velocity profiles in liquid films flowing over rotating conical surfaces are of considerable ... 扩展阅读

Two-Phase Flow and Multiphysics Simulations in COMSOL


Dr. Singh has been working at the Chemical Engineering Division, Bhabha Atomic Research Centre, Mumbai since ... 扩展阅读

Modeling a Combined Photovoltaic-Thermal Panel

E. Gutierrez-Miravete[1], B. Fontenault[2]
[1]Rensselaer Polytechnic Institute, Hartford, CT, USA
[2]General Dynamics-Electric Boat, Groton, CT, USA

A novel combined photovoltaic-thermal panel can simultaneously increase the conversion efficiency of the PV ... 扩展阅读

Modeling of Transport Phenomena in Laser Welding of Steels

A. Métais [1], S. Matteï [2], I. Tomashchuk [2], S. Gaied [1]
[1] ArcelorMittal, Montataire, France
[2] Laboratoire Interdisciplinaire Carnot de Bourgogne, Université Bourgogne Franche Comté, France

Laser Welded Blank solutions enable to reduce vehicles weight and to optimize their crash performances by ... 扩展阅读