了解多物理场仿真在基础研究和产品设计中的应用

各个行业的工程师和科研人员都在使用多物理场仿真来研发创新的产品设计和流程。他们在 COMSOL 用户年会上展示了丰富的技术论文和演示文稿,您可以从他们的研究成果中寻找灵感。

使用左侧【快速搜索】工具查找您感兴趣的研究,或按照应用领域进行筛选。


查看 COMSOL 用户年会 2020 论文

Transport Phenomenax

Modeling of Coupled Fluid Flow and Shear-induced Solidification Kinetics in Rheocasting of Aluminium Alloys

G. Maizza, and G. Lorenzatto
Politecnico di Torino
Dipartimento di Scienza dei Materiali ed Ingegneria Chimica
Torino, Italy

The model proposed by Schneider et al., for polymers is herein adapted in order to assess its suitability in ... 扩展阅读

Experimental and Numerical Study of Microbial Improved Oil Recovery in a Pore Scale Model by using COMSOL

M. Shabani Afrapoli, L. Shidong, S. Alipour , and O. Torsaeter
Department of Petroleum Engineering and Applied Geophysics
NTNU
Trondheim, Norway

A number of visualization experiments are carried out at the laboratory temperature with oil, brine and ... 扩展阅读

Mass Transfer From a Rotating Cylinder in a Confined Gas Flow

N. Jand[1], A. Scarpetta[2], and M. Stefano[2]
[1]Chemical Engineering Department, University of L’Aquila, L’Aquila, Italy
[2]Faculty of Engineering, University of L'Aquila, L’Aquila, Italy

The modeling of sublimation form a rotating cylinder of solid naphthalene in a confined vessel has been ... 扩展阅读

Modeling of Chemo-Mechanical Coupled Behavior of Cement Based Material

D. Hu[1], F. Zhang[2], H. Zhou[3], and J. Shao[1]
[1]LML, UMR8107, CNRS, University of Lille I, Lille, France
[2]School of Civil Engineering and Architecture, Hubei University of Technology, Wuhan, China
[3]State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan, China

A lixiviation-mechanical coupled model is developed for fiber reinforced concrete within this framework; both ... 扩展阅读

Simulation of the Degradation of Methyl Red by Gliding Arc Plasma

S. Cavadias [1], B. Trifi [2], S. Ognier[1], and N. Bellakhal[3]
[1]Laboratoire de Génie des Procédés Plasma et Traitement de Surface, Ecole Nationale Supérieure de Chimie de Paris, Université Pierre et Marie Curie, Paris, France
[2]Laboratoire de Chimie Analytique et Electrochimie, Département de Chimie, Faculté des Sciences de Tunis, Université Tunis El Manar, Tunis, Tunisie
[3]Département de Chimie et de Biologie Appliquées, Institut National des Sciences Appliquées et de Technologie, B.P. N°676, 1080 Tunis Cedex, Tunis, Tunisie

The use of plasmas for the treatment industrial effluents provides a new alternative to the decontamination ... 扩展阅读

On the Drying Dynamics in Biofilters

F. Schönfeld
Hochschule RheinMain
University of Applied Sciences
Wiesbaden, Germany

The performance of biofilters relies on the presence of a sufficient amount of water in the biofilter ... 扩展阅读

Model of a Heavy Metal Adsorption System using the S-Layer of Bacillus Sphaericus

J. Orjuela, and A. González
Dept. de Ingeniería Química Facultad de Ingeniería
Universidad de los Andes
Bogotá
Colombia

A bidimensional and pseudo homogenous model was proposed for the study of mass transfer in the bioadsorption ... 扩展阅读

Using Comsol 4.1 to Build a Transient Model of a Drift Tube Ion Mobility Spectrometer with Improved Performance

J. Langejürgen, P. Cochems, U. Günay, M. Allers, and S. Zimmermann
Leibniz University Hannover
Hannover, Germany

An Ion Mobility Spectrometer is a device to analyze different components of a gas mixture. A feature of this ... 扩展阅读

Modeling and Simulation of Hydrogen Storage Device for Fuel Cell Plant Using COMSOL Multiphysics

O. Akanji, and A. Kolesnikov
Department of Chemical & Metallurgical Engineering
Tshwane University of Technolgy
Pretoria, South Africa

In this work, a 2D dynamic simulation for a portion of metal hydride based hydrogen storage tank was ... 扩展阅读

Numerical Analysis of Heating and Ablating Non-Pyrolitic Materials

A. Davidy
IMI
Ramat-Hasharon
Israel

In this paper a two dimensional time dependent model is developed and assessed to describe the interrelated ... 扩展阅读