Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Are all post-processing function only using single CPU core?
Posted 2012年11月20日 GMT-5 09:35 RF & Microwave Engineering, Results & Visualization Version 4.3a 1 Reply
Please login with a confirmed email address before reporting spam
Hi all,
I'm doing 3D eigenvalue simulations. I noticed that I can used pardiso direct solver to take advantage of multi-core CPUs.
However, when I went to the point of post-processing, e.g. exporting volume integral for all eigenmodes, the integration is only running on a single CPU-core. It's very slow as a single sequential thread. I'm Considering such process could be easily parallelized?
Is it possible that all post-processing can be updated with multiple-thread calculations?
I'm doing 3D eigenvalue simulations. I noticed that I can used pardiso direct solver to take advantage of multi-core CPUs.
However, when I went to the point of post-processing, e.g. exporting volume integral for all eigenmodes, the integration is only running on a single CPU-core. It's very slow as a single sequential thread. I'm Considering such process could be easily parallelized?
Is it possible that all post-processing can be updated with multiple-thread calculations?
1 Reply Last Post 2012年11月23日 GMT-5 17:55
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Post-processing functions vary in their use of parallelism. I've observed parallel post-processing with many cores, as well as many cases where only one core is utilized. Let's all encourage Comsol to parallelize as many post-processing functions as possible.