Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Welcome to a new forum!

Posted 2009年6月16日 GMT-4 09:06 MEMS & Nanotechnology, MEMS & Piezoelectric Devices Version 4.1, Version 4.3a 5 Replies

Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Welcome to The COMSOL Discussion Forum.

The goal of the COMSOL Community section is to improve the community experience through increased communication, fellowship, and inclusiveness. It is a place for our community to trade ideas and get together.

In this forum, you can post messages with questions, comments or ideas you want to share. You are free to answer other users' posts.

It should be fairly straightforward to use the forum, but take your time to read the rules and guidelines, see link below.

I am looking forward to being part of this community platform.

Niklas Rom, COMSOL
5 Replies Last Post 2014年7月18日 GMT-4 05:15
Peter Cendula
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago 2009年7月8日 GMT-4 13:41
Little bit late to launch the forum, when you're 10 years old company!
But good anyway ;)
Little bit late to launch the forum, when you're 10 years old company! But good anyway ;)
Honghui Shen
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago 2009年8月20日 GMT-4 16:55


I think it's better to divide the forum into different parts according to the modules in comsol, like RF module forum, MEMS forum, etc. then people can easy to find something they might be interested in

Regards
I think it's better to divide the forum into different parts according to the modules in comsol, like RF module forum, MEMS forum, etc. then people can easy to find something they might be interested in Regards
Linlin Yu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago 2009年8月22日 GMT-4 03:25

I think it's better to divide the forum into different parts according to the modules in comsol, like RF module forum, MEMS forum, etc. then people can easy to find something they might be interested in

Regards



Yes, I can't agree more.
[QUOTE] I think it's better to divide the forum into different parts according to the modules in comsol, like RF module forum, MEMS forum, etc. then people can easy to find something they might be interested in Regards [/QUOTE] Yes, I can't agree more.
Asaf Halamish
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年12月29日 GMT-5 03:19
Looking for outsourcing for Flow and Heat Transfer Analysis with Comsol.
The work shall be done in Israel, preferably in the north (close to Haifa)
Pls contact me by mail or phone"
Asaf
asafhalamish@gmail.com
054-3158881
Thanks
Looking for outsourcing for Flow and Heat Transfer Analysis with Comsol. The work shall be done in Israel, preferably in the north (close to Haifa) Pls contact me by mail or phone" Asaf asafhalamish@gmail.com 054-3158881 Thanks
Saranya Mani
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年7月18日 GMT-4 05:15
hi friends ,how to add voltage source
hi friends ,how to add voltage source

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content