Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

displaying results

Posted 2016年1月21日 GMT-5 14:23 Results & Visualization 4 Replies

Amine Laaouatni
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi

I have a small problem when displaying results. During the simulation, I found that the variation curves move and away from t = 0 and I see only the change to an intermediate interval. So when the simulation is over, I do not get change from time 0 and even in the table associated with the probe, I do not see the data from the beginning. !!!

Thank you
4 Replies Last Post 2016年1月24日 GMT-5 17:18
Badri Suhaini
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2016年1月22日 GMT-5 02:33
I do not understand, can you show a screenshot of the thing?
I do not understand, can you show a screenshot of the thing?
Amine Laaouatni
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2016年1月22日 GMT-5 05:33
Hi,

Here in attached a screenshot of my problem. knowing that the computing time that I chose is (0,600,259200). but when viewing the final results, I find myself with this curve that starts from 200,000 s and not from the beginning of the simulation.

Thank you
Hi, Here in attached a screenshot of my problem. knowing that the computing time that I chose is (0,600,259200). but when viewing the final results, I find myself with this curve that starts from 200,000 s and not from the beginning of the simulation. Thank you
Gunnar Andersson COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2016年1月22日 GMT-5 06:52
There's a limit on how many lines a table can contain. It's 10000 by default - maybe your solver takes more than 10000 steps. You can change the limit in Preferences > Results > Defaults for new tables: Maximum number of rows. For an existing model you can change the limit for a table in the settings in Results > Tables.
There's a limit on how many lines a table can contain. It's 10000 by default - maybe your solver takes more than 10000 steps. You can change the limit in Preferences > Results > Defaults for new tables: Maximum number of rows. For an existing model you can change the limit for a table in the settings in Results > Tables.
Amine Laaouatni
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2016年1月24日 GMT-5 17:18
Thankyou for your suggestion. Very much satisfied.
Thankyou for your suggestion. Very much satisfied.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content