Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Electrostatics: How to model a conductor in COMSOL?
Posted 2016年2月4日 GMT-5 14:32 Low-Frequency Electromagnetics, Materials, Studies & Solvers 0 Replies
Please login with a confirmed email address before reporting spam
I am trying to simulate a very simple system. I have two metal plates with a gap between them, placed in a box of "Air". One plate has a potential of 4000 V and the other is at 0 V. When I apply the material "Copper" to the plates from the library, the relative permittivity of it is given by default as 1. On simulating this I get very high potential all through the air box of around 2000 V except at the plates which is a gradient. And when I set the relative permittivity to 10e10 (very high value), I get zero potential through the box except at the high potential plate where there is a gradient.
So my question is: What is the correct way to model a conductor? How do you deal with the permittivity default value?
Thanks!
-Shagun
Hello Shagun Maheshwari
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.