Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to have different mesh densities on a simple, 1D geometry?
Posted 2016年2月7日 GMT-5 08:53 Mesh Version 5.2 1 Reply
Please login with a confirmed email address before reporting spam
Hi. This may be a very obvious question, but I can't seem to be able to find the solution.
I have a very simple 1D geometry: a line segment from 1 to 7 i.e. 1<x<7.
I want to have an extremely fine user controlled mesh for 1<x<2.25, and a much coarser mesh for 2.25<x<7. How do I do this? I assume it is easy and that I'm just missing the obvious. If there isn't an obvious way of doing it, I can reply here with that I've tried already.
Thanks.
I have a very simple 1D geometry: a line segment from 1 to 7 i.e. 1<x<7.
I want to have an extremely fine user controlled mesh for 1<x<2.25, and a much coarser mesh for 2.25<x<7. How do I do this? I assume it is easy and that I'm just missing the obvious. If there isn't an obvious way of doing it, I can reply here with that I've tried already.
Thanks.
1 Reply Last Post 2016年2月7日 GMT-5 13:05
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Paul,
just add a point at x = 2.25 and you get two segments that can be meshed individually.
Cheers
Edgar
--
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
just add a point at x = 2.25 and you get two segments that can be meshed individually.
Cheers
Edgar
--
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com