Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Boundary condition question of a MEMS thermal problem

Posted 2010年10月26日 GMT-4 07:18 0 Replies

CMS GP
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I would like to investigate the temperature distribution generated by many many (>1000) interdigitated micro beams as shown in FIGURE1. The red beam has high temperature while the blue one has low temperature. The unit cell I choose is shown in FIGURE2. The boundary condition of the beam is Dirichlet B.C. (i.e. constant temperature).

My question is what is the boundary condition of the dashed lines outside the beam. I think they have symmetry B.C. (i.e Neumann B.C.). However, what confused me in COMSOL is it has "Periodic B.C." as well. I don't know when to use "Periodic B.C."

Anyone can advise me on this issue? Thanks.

Attachments:

0 Replies Last Post 2010年10月26日 GMT-4 07:18
COMSOL Moderator

Hello CMS GP

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content