Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Open Boundary
Posted 2016年3月10日 GMT-5 04:47 Fluid & Heat, Computational Fluid Dynamics (CFD) Version 5.2 3 Replies
Please login with a confirmed email address before reporting spam
Hi everyone,
I have a model with two domains one of which is laminar flow and another is porous media domain (Darcy's law). The fluid stream percolates from the laminar flow domain into the Darcy law domain. I modelled the geometry as a union and then used "open boundary' condition in laminar flow but in the Darcy law domain the open boundary is still showing as wall! Any suggestions would be appreciated.
Thanks
I have a model with two domains one of which is laminar flow and another is porous media domain (Darcy's law). The fluid stream percolates from the laminar flow domain into the Darcy law domain. I modelled the geometry as a union and then used "open boundary' condition in laminar flow but in the Darcy law domain the open boundary is still showing as wall! Any suggestions would be appreciated.
Thanks
3 Replies Last Post 2016年3月14日 GMT-4 06:47
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
I also have the same problem now.
Hope to hear from others soon !
Hope to hear from others soon !
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Hi
I have used Leaking wall BC at the boundary of laminar/turbulent flow and a porous material. In the fluid velocity box I type the variables of the Laminar flow physics. It seems to give the result that the flow penetrates into the porous material, as expected.
BR
Lasse
I have used Leaking wall BC at the boundary of laminar/turbulent flow and a porous material. In the fluid velocity box I type the variables of the Laminar flow physics. It seems to give the result that the flow penetrates into the porous material, as expected.
BR
Lasse
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Hi,
Thanks Lasse for the suggestion. There is another method also. Define laminar flow over all the domains, then check 'enable porous media domain' and add fluid and porous media attribute.
Cheers!!
Mahvash
Thanks Lasse for the suggestion. There is another method also. Define laminar flow over all the domains, then check 'enable porous media domain' and add fluid and porous media attribute.
Cheers!!
Mahvash