Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
User defined Coil Geometry- Square shape PM and Coil- Moving mesh
Posted 2016年5月13日 GMT-4 19:48 0 Replies
Please login with a confirmed email address before reporting spam
In my model, square shape PM can move in z direction, but there is no motion for the coil.
My problem is with using the current flow in the coil as I am using user defined coil geometry for my model because I cannot use linear or circular type coil for the considered geometry of the coil.
I don't know how I can define coil current flow in user-defined coil geometry.
I run the model and for the time dependent part the obtained current is zero but it shouldn't be because there is a relative motion between coil and PM, and I think it is related to defining coil-current flow.
Please note initially the considered current for the coil is zero, but we must have induced current in the coil because of having relative motion between coil and PM, and accordingly, change of magnetic flux density.
It would be great to help me for it.
Thanks, Ehsan
Attachments:
Hello Ehsan Asadi
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.