Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Comsol 4.0 Orthotropic Shell Elements

Posted 2010年11月21日 GMT-5 10:46 2 Replies

Tom Haworth
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I was wondering if it's possible to define a shell model material to have orthotropic elastic properties in COMSOL 4.0.

I can only work out how to do this for solid mechanics but I seem to remember I could have orthotropic shell elements in version 3.5a.

Is this possible or can I only use isotropic elastic properties for shell models? I don't think I can go to a full 3D model as the complexity will be too much for my PC's ram.

Thanks
2 Replies Last Post 2010年11月22日 GMT-5 14:22
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010年11月21日 GMT-5 18:05
Hi

at least in V4.1 you can select orthotropic Elastic Material Models for 3D Shell elements

--
Good luck
Ivar
Hi at least in V4.1 you can select orthotropic Elastic Material Models for 3D Shell elements -- Good luck Ivar
Tom Haworth
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010年11月22日 GMT-5 14:22
I managed to get a copy of 4.0a and it works fine

Thanks for your help :)
I managed to get a copy of 4.0a and it works fine Thanks for your help :)

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content