Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Probing Effective Refractive Index in RF Module

Posted 2010年11月22日 GMT-5 03:42 RF & Microwave Engineering, Studies & Solvers Version 4.0a 5 Replies

Kevin Shahbazi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I've been working on calculating the effective refractive index of a photonic crystal based on a parametric sweep of a geometric parameter in COMSOL 4-->RF Module-->Mode Analysis. I have tried doing tutorials, asking professors at my university and e-mailing COMSOL support, yet I am still not able to probe the effective refractive index of the geometry as a function of my geometric parameter (layer thickness).

If anyone has any experience with probing variables in COMSOL, or who can help me conduct this sweep, it would be greatly appreciated.

To add an extra level of complexity, if anyone knows how to conduct a two parameter sweep, I would really appreciate this!

Thank you very much.

Kevin Shahbazi
5 Replies Last Post 2012年7月28日 GMT-4 04:23
COMSOL Moderator

Hello Kevin Shahbazi

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Arian Kirsch
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010年12月30日 GMT-5 18:44
Dear colleagues,

I have exactly the same problem. I am using Consol 4.0 with the RF module and I cannot get a list with my maximum neff values (I want to get the full, complex neff with the maximum real part for each mode found). I do a geometrical parameter sweep and get a lot of solutions with each a set of neff.
I can guess this is a problem which really many people have, doing work with comsol in optics particularly.

Best regards

Arian
Dear colleagues, I have exactly the same problem. I am using Consol 4.0 with the RF module and I cannot get a list with my maximum neff values (I want to get the full, complex neff with the maximum real part for each mode found). I do a geometrical parameter sweep and get a lot of solutions with each a set of neff. I can guess this is a problem which really many people have, doing work with comsol in optics particularly. Best regards Arian
Alexandros Kapsalis
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年1月10日 GMT-5 08:14
Hi,

If you are using V4.2 then a global variable probe exists with a name neff (emw.neff). If you are using a previous version the you can use a probe variable with the expression j*lambda/emw.k0.
Does anyone now how to distinguish probes between different solutions?

Alx
Hi, If you are using V4.2 then a global variable probe exists with a name neff (emw.neff). If you are using a previous version the you can use a probe variable with the expression j*lambda/emw.k0. Does anyone now how to distinguish probes between different solutions? Alx
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年1月10日 GMT-5 08:21
Hi

A probe generates a specific "Data Set - Probe Solution" there you see to which "Data Set - Solution" it points, slightly cumbersome I agree ;)

--
Good luck
Ivar
Hi A probe generates a specific "Data Set - Probe Solution" there you see to which "Data Set - Solution" it points, slightly cumbersome I agree ;) -- Good luck Ivar
Alexandros Kapsalis
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年1月10日 GMT-5 09:23
Thanks for that,

Maybe I did not state my problem well. I have trouble getting the probe value of the effective index (neff) out of the same (probably) solution. For example I request more the one modes around an index value. The result of the probe always refers to the mode with the higher effective index.

Any ideas?
Thanks in advance
Thanks for that, Maybe I did not state my problem well. I have trouble getting the probe value of the effective index (neff) out of the same (probably) solution. For example I request more the one modes around an index value. The result of the probe always refers to the mode with the higher effective index. Any ideas? Thanks in advance
Guan Xiaowei
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年7月28日 GMT-4 04:23
Dear Ivar,

I had a problem when I tried to find the bend modes i.e. the effective refractive indexes, in a silicon ring with air as the cladding by using 2D-axisymmetric and RF module->mode analysis. The problem is all the refractive indexes are very small, which were actually supposed to be a little lower than the refractive idex of silicon, 3.435, and with a loss (imaginary) part.

Actually, I have readed some discussion from the Forum, like the one from Hartwig:

www.comsol.com/community/forums/general/thread/24819/

Actually, my problem is the same with his, but I am not sure I have been clear about his proposed answer, like the "per unit length", which can not be found in V4.0a. (may be can be found in V4.2)

In the attachment, please find my .mph file. If any suggestions, you can modify it directly in the file and send me back : gxwhnxcdndx@yahoo.com.cn

Thanks in advance and best regards!

xiaowei



Dear Ivar, I had a problem when I tried to find the bend modes i.e. the effective refractive indexes, in a silicon ring with air as the cladding by using 2D-axisymmetric and RF module->mode analysis. The problem is all the refractive indexes are very small, which were actually supposed to be a little lower than the refractive idex of silicon, 3.435, and with a loss (imaginary) part. Actually, I have readed some discussion from the Forum, like the one from Hartwig: http://www.comsol.com/community/forums/general/thread/24819/ Actually, my problem is the same with his, but I am not sure I have been clear about his proposed answer, like the "per unit length", which can not be found in V4.0a. (may be can be found in V4.2) In the attachment, please find my .mph file. If any suggestions, you can modify it directly in the file and send me back : gxwhnxcdndx@yahoo.com.cn Thanks in advance and best regards! xiaowei

Attachments:

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content