Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Parametric Sweep on geometry objects
Posted 2016年6月30日 GMT-4 12:16 Geometry, Parameters, Variables, & Functions, Studies & Solvers 1 Reply
Please login with a confirmed email address before reporting spam
Dear Support team,
i would like to perform a parametric sweep in which one or multiple domains are consecutively enabled or disabled. I already tried solve this by moving the object far away from the rest of the geometry by parametric sweep but this results in a coarser mesh because of an overall larger geometry.
Is there a bettter way to do it?
i would like to perform a parametric sweep in which one or multiple domains are consecutively enabled or disabled. I already tried solve this by moving the object far away from the rest of the geometry by parametric sweep but this results in a coarser mesh because of an overall larger geometry.
Is there a bettter way to do it?
1 Reply Last Post 2016年6月30日 GMT-4 12:27
Please login with a confirmed email address before reporting spam
Posted:
8 years ago
I think i found it. It should work via material sweep somehow.