Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Calculation of multi-turn Coil Indutance
Posted 2016年7月7日 GMT-4 09:56 Low-Frequency Electromagnetics Version 5.2 4 Replies
Please login with a confirmed email address before reporting spam
I have simulated a multi-turn coil (Coil type: Numeric). The coil excitation was set as Current 1A. I used Global Evaluation to get the value of the inductance of the coil. The evaluation expression was mf.intWm*2 (because the 0.5LI^2=W and the I was 1A ). I found that the value that I get was only half of mf.LCoil_1.
I don't know why. Thank you for helping me.
Hello Tony Adams
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
Was your solution stationary or frequency domain? If in the frequency domain, suppose that the excitation current was 1A peak, hence the rms current is sqrt(2)*1A => i^2 = 0.5*1A, this could explains the 1/2 factor difference.
Please login with a confirmed email address before reporting spam
Please login with a confirmed email address before reporting spam
I'm not entirely sure, just a guestamate.
Was your solution stationary or frequency domain? If in the frequency domain, suppose that the excitation current was 1A peak, hence the rms current is sqrt(2)*1A => i^2 = 0.5*1A, this could explains the 1/2 factor difference.
wow! It seems so reasonable! Thanks a lot!
Please login with a confirmed email address before reporting spam
Are you using symmetry in your model?
No. I simulated in 3D model. Thanks for reply!