Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

COMSOL 4: "Reradiating Surface"

Posted 2010年12月7日 GMT-5 06:07 Heat Transfer & Phase Change Version 4.0, Version 4.0a, Version 4.1 3 Replies

Kai Herbrig
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi there,

I'm interested about new features of COMSOL 4.

Especially I would like to know what the "Reradiating Surface" boundary condition is, which is avaivible in the heat Transfer Module. Is it a diffusive reflector?

I'm using 3.5a and there is no such feature.

kind regards
3 Replies Last Post 2010年12月8日 GMT-5 07:28
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010年12月7日 GMT-5 10:43
Hi

if you take the HT user guide V4.1 on p89 you will read

The Reradiating Surface feature is a variant of the surface-to-surface radiation feature
with e = 0. Reradiation surfaces are common as an approximation of a surface that is
well insulated on one side and for which convection effects can be neglected on the
opposite (radiating) side.
It resembles a mirror that absorbs all irradiation and then
radiates it back in all directions: J = G. The feature adds the radiosity dependent
variable to its selection and uses it as surface radiosity.

Heat flux on surface-to-surface boundary is zero:

.....

--
Good luck
Ivar
Hi if you take the HT user guide V4.1 on p89 you will read The Reradiating Surface feature is a variant of the surface-to-surface radiation feature with e = 0. Reradiation surfaces are common as an approximation of a surface that is well insulated on one side and for which convection effects can be neglected on the opposite (radiating) side. It resembles a mirror that absorbs all irradiation and then radiates it back in all directions: J = G. The feature adds the radiosity dependent variable to its selection and uses it as surface radiosity. Heat flux on surface-to-surface boundary is zero: ..... -- Good luck Ivar
Kai Herbrig
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010年12月8日 GMT-5 05:09
Hi Ivar,

if I had Comsol 4.1, then I would take the HT user guide and then I would read on page 89 " .... " but ... I haven't ;)

So thanks (again). I expected that this boundray condition would work like this.


Best regards
Hi Ivar, if I had Comsol 4.1, then I would take the HT user guide and then I would read on page 89 " .... " but ... I haven't ;) So thanks (again). I expected that this boundray condition would work like this. Best regards
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010年12月8日 GMT-5 07:28
Hi

well then you have part of the page on my previous post. You should get in contact with your local rep or xou COMSOl administrator to get access to latest 4.1 as ist much better documented and more stable than the first 4.0a even.

Another way is to search on the web ...

--
Good luck
Ivar
Hi well then you have part of the page on my previous post. You should get in contact with your local rep or xou COMSOl administrator to get access to latest 4.1 as ist much better documented and more stable than the first 4.0a even. Another way is to search on the web ... -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content