Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Simulation of inverse magnetostriction (Villari effect)

Please login with a confirmed email address before reporting spam

Could someone please help me with simulation of inverse magnetostriction? The general ideal is to apply stress (spatially non-uniform) to a magnetostrictive pillar and calculate the resulting magnetization.

3 Replies Last Post 2016年7月25日 GMT-4 00:14
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2016年7月22日 GMT-4 13:16
Hi,

Bi-directional magnetostriction (including the Villari effect) is available from version 5.2a.

www.comsol.com/release/5.2a/structural-mechanics-module

Regards,
Henrik
Hi, Bi-directional magnetostriction (including the Villari effect) is available from version 5.2a. https://www.comsol.com/release/5.2a/structural-mechanics-module Regards, Henrik

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2016年7月24日 GMT-4 05:02
Problem is, I only have access to COMSOL 5.2
Problem is, I only have access to COMSOL 5.2

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2016年7月25日 GMT-4 00:14
Ok, I've found the answer to my own question :)

Here is a tutorial for both direct and inverse non-linear magnetostriction effect (for COMSOL versions earlier than 5.2a): slideplayer.com/slide/1567868/
Ok, I've found the answer to my own question :) Here is a tutorial for both direct and inverse non-linear magnetostriction effect (for COMSOL versions earlier than 5.2a): http://slideplayer.com/slide/1567868/

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.