Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Computing the ratio of input/output power in wave optics module

Posted 2016年7月24日 GMT-4 05:57 Wave Optics Version 5.2 2 Replies

Nirmalendu Acharyya
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I am a beginner with COMSOL.

I have made a simulation in which I have waveguide which bends. I have found the Electric field. I want to compute the bending loss by comparing the total intensity/power at input and output. Please see the attached file.

Thank you.

Best regards,
Nirmalendu Acharyya

2 Replies Last Post 2016年7月25日 GMT-4 04:57
Chris Nadovich
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2016年7月24日 GMT-4 17:25
Have you tried Derived Values -> Global Evaluation -> -20*log10(ewfd.S21)? Didn't look at your file.
Have you tried Derived Values -> Global Evaluation -> -20*log10(ewfd.S21)? Didn't look at your file.
Nirmalendu Acharyya
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2016年7月25日 GMT-4 04:57

Have you tried Derived Values -> Global Evaluation -> -20*log10(ewfd.S21)? Didn't look at your file.


Thank you. That Helps.

Best redards,
Nirmalendu
[QUOTE] Have you tried Derived Values -> Global Evaluation -> -20*log10(ewfd.S21)? Didn't look at your file. [/QUOTE] Thank you. That Helps. Best redards, Nirmalendu

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content