Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
time dependent boundary conditions on comsol 4.0
Posted 2010年12月21日 GMT-5 11:52 Low-Frequency Electromagnetics Version 4.0 0 Replies
Please login with a confirmed email address before reporting spam
Im new with COMSOL.
I built a simple model of a capacitor:
a box with one face set to ground, the parallel face has an electric potential, and all the other boundaries are insulation.
I did it through:
model builder-->model1-->electric currents
(I chose the AD/DC module)
now, I would like to create a time dependent electric field, can I choose the electric potential under "electric currents" to be time dependent?
if so - how do I do it, and what should be the definitions when I create the model?
I tried to define "time dependent" on the study-type in the model wizard, but I dont really know how to use it in the model.
I looked for relevant tutorials but unfortunately couldn't find comsol 4.0 tutorials about time dependency.
thank you for your help,
hilly.
Hello Hilly Boimel
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.