Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to find gradient in COMSOL 4.1
Posted 2011年1月9日 GMT-5 14:29 Version 4.1 1 Reply
Please login with a confirmed email address before reporting spam
I want to write my own equation in "derived value" expression field. What function should I use to find 'Grad' of a function.
1 Reply Last Post 2011年1月10日 GMT-5 03:48
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
it depends on which variable, COMSOL has many internal derivatives defind (note the varible notation if u,v,w are dependent variables ux is du/dx, ut = du/dt, utt=d^2u/dt^2 etc. There is no GRAD operator, but you can wrie it out fully with the (ux,uy,uz)
Check the doc, perhaps the 3.5a doc is still more complete on this, or take some of the books , the one of Zimmermann is my preferred for learning how to do math/equation writin with COSMOL
At least read the 4.1 doc aoround p 100 of the user manual on the variables
--
Good luck
Ivar
it depends on which variable, COMSOL has many internal derivatives defind (note the varible notation if u,v,w are dependent variables ux is du/dx, ut = du/dt, utt=d^2u/dt^2 etc. There is no GRAD operator, but you can wrie it out fully with the (ux,uy,uz)
Check the doc, perhaps the 3.5a doc is still more complete on this, or take some of the books , the one of Zimmermann is my preferred for learning how to do math/equation writin with COSMOL
At least read the 4.1 doc aoround p 100 of the user manual on the variables
--
Good luck
Ivar