Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Vibration of a cylinderical solid body due to fluidic vortex.

Posted 2016年10月25日 GMT-4 07:17 Fluid & Heat, Structural Mechanics Version 4.3 0 Replies

Mohammed AlAqil
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi there,

I'm new to COMSOL and trying to model a fluid flow across cylindrical shaped solid bodies in 2D. The model should produce a vibrating (varying the displacement) cylindrical body with the vortex shedding due to fluid-structure interaction (FSI). I tried to model and simulate a similar procedure as the one provided in the application examples, however, the output is not properly produced. The output shows the outer boundaries (outer layer) is moving up and down but the cylinder (circular shaped geometry) is fixed within the mesh.


I would appreciate it if anyone could help on this.



Regards,
Mohammed
0 Replies Last Post 2016年10月25日 GMT-4 07:17
COMSOL Moderator

Hello Mohammed AlAqil

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content