Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to resolve this error
Posted 2011年1月16日 GMT-5 16:10 Version 4.1 1 Reply
Please login with a confirmed email address before reporting spam
Dear Sir,
when I modeled a small specimen in a fluid inside the cavity of microwave oven, I got the following error:
Time dependent Solver (sol/t1)
Failed to find consistent initial values
undefined or Inf found when solving linear system solver using SOR
Last step is not converged
Would someone help me how to fix the error.
Thanks,
Iman Hassaballa
when I modeled a small specimen in a fluid inside the cavity of microwave oven, I got the following error:
Time dependent Solver (sol/t1)
Failed to find consistent initial values
undefined or Inf found when solving linear system solver using SOR
Last step is not converged
Would someone help me how to fix the error.
Thanks,
Iman Hassaballa
1 Reply Last Post 2011年1月17日 GMT-5 00:45
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
it can be a few thinks , I believe, but by default the initial values are all set to "0" this is often quite far from the results, so often it's wiser to estimate what are about the results, and set up the initial conditions accordingly. I agree for complex geometries its rather difficult, so its a question of testing it out.
Then it couldbe that you are missing some BC (boundary conditions) or that some are contradictory
--
Good luck
Ivar
it can be a few thinks , I believe, but by default the initial values are all set to "0" this is often quite far from the results, so often it's wiser to estimate what are about the results, and set up the initial conditions accordingly. I agree for complex geometries its rather difficult, so its a question of testing it out.
Then it couldbe that you are missing some BC (boundary conditions) or that some are contradictory
--
Good luck
Ivar