Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Parametric sweep of geometry with particle tracing study
Posted 2017年1月16日 GMT-5 01:43 Low-Frequency Electromagnetics, Charged Particle Tracing, Particle Tracing for Fluid Flow, Modeling Tools & Definitions, Parameters, Variables, & Functions, Studies & Solvers Version 5.2 1 Reply
Please login with a confirmed email address before reporting spam
Hi all,
I'm studying the effect of the position of an electrode (electrostatic) on the trajectory of particles flying through said geometry. I would like to achieve this with a parametric sweep of the electrode position relative to others, and fly the particles for each of the geometries.
I have the computation of the electric field and particle trajectories as two separate studies, the first of which contains the parametric sweep. I can point the trajectory study to use any one of the discrete solutions corresponding to each of the parameter steps, but how do I tell COMSOL to compute particle trajectories for every single one of the solutions computed in the sweep?
I'm studying the effect of the position of an electrode (electrostatic) on the trajectory of particles flying through said geometry. I would like to achieve this with a parametric sweep of the electrode position relative to others, and fly the particles for each of the geometries.
I have the computation of the electric field and particle trajectories as two separate studies, the first of which contains the parametric sweep. I can point the trajectory study to use any one of the discrete solutions corresponding to each of the parameter steps, but how do I tell COMSOL to compute particle trajectories for every single one of the solutions computed in the sweep?
1 Reply Last Post 2017年2月9日 GMT-5 11:58
Please login with a confirmed email address before reporting spam
Posted:
8 years ago
Bumping this thread. I have the same question.