Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

coil impedance

Posted 2017年1月23日 GMT-5 09:08 Low-Frequency Electromagnetics Version 5.2 3 Replies

Bouhlal Abdelkader
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi every body,

I am a new user of COMSOL and I started to do a simulation of a nondestructive testing problem. My model is composed of a circular multiturn coil above a metal plate. an alternative current is applied to the coil, and I want to calculate the impedance of the coil.

please can anyone help me to solve my problem ?
3 Replies Last Post 2017年1月26日 GMT-5 09:37
Dave Greve
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2017年1月24日 GMT-5 12:47
If I am understanding you correctly- you should look in the application library for "coil above plate." In that example you can perform a Global Evaluation (under Derived Values) using the expression mf.ZCoil_1 (1 being the coil number) found under Coil Parameters.

This gives you the complex coil impedance.

DW Greve
DWGreve Consulting
If I am understanding you correctly- you should look in the application library for "coil above plate." In that example you can perform a Global Evaluation (under Derived Values) using the expression mf.ZCoil_1 (1 being the coil number) found under Coil Parameters. This gives you the complex coil impedance. DW Greve DWGreve Consulting
Bouhlal Abdelkader
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2017年1月25日 GMT-5 05:19
Thank you very much for your response, actually I already did what you said to me and I have got the impedance but when I look at the values I think that there is something wrong. may be I didn't set the poblem correctly.
1/Is there a difference in results if we use a circular multiturn coil or numeric multiturn coil?
2/ can I send you what I did to look at it when you have time?
Thank you very much for your response, actually I already did what you said to me and I have got the impedance but when I look at the values I think that there is something wrong. may be I didn't set the poblem correctly. 1/Is there a difference in results if we use a circular multiturn coil or numeric multiturn coil? 2/ can I send you what I did to look at it when you have time?
Nirmal Paudel Tribhuvan University/Electrical Engineering
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2017年1月26日 GMT-5 09:37
Hi Bouhlal,

The following Application Example include a collection of different types of coils in 3D, which I think is very useful for understanding the difference in the result.

www.comsol.com/model/3d-coil-types-in-comsol-multiphysics-42431

Best Regards,
Nirmal
Hi Bouhlal, The following Application Example include a collection of different types of coils in 3D, which I think is very useful for understanding the difference in the result. https://www.comsol.com/model/3d-coil-types-in-comsol-multiphysics-42431 Best Regards, Nirmal

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content