Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Using the Subsurface Flow Module to simulate karstic systems

Posted 2017年2月2日 GMT-5 09:33 Fluid & Heat, Porous Media Flow Version 5.2a 1 Reply

Carlo
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I would like to know if in the Comsol Multiphysics Community there is any example of application of the Subsurface Flow Module to karstic systems,
Thanks in advance

Carlo Gualtieri
1 Reply Last Post 2017年2月2日 GMT-5 13:49
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2017年2月2日 GMT-5 13:49
Hi Carlo,
I did a search on Scholar.google.com using the search words "karst + COMSOL" and found quite a few papers:
scholar.google.com/scholar?hl=en&q=karst+%2B+COMSOL&btnG=&as_sdt=1%2C22&as_sdtp=
Best regards,
Jeff
Hi Carlo, I did a search on Scholar.google.com using the search words "karst + COMSOL" and found quite a few papers: https://scholar.google.com/scholar?hl=en&q=karst+%2B+COMSOL&btnG=&as_sdt=1%2C22&as_sdtp= Best regards, Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content