Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Modeling Acoustic Emission in a simple surface

Posted 2011年2月2日 GMT-5 17:14 Acoustics & Vibrations, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.1, Version 4.3 2 Replies

Brian Philpot
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Can COMSOL model the propagation of Acoustic Emission waves (E and F modes) on a simple surface when a pencil lead break occurs? For example a pencil lead break on the surface of a small aluminum plate.

Can it do it over time?

2 Replies Last Post 2012年9月5日 GMT-4 11:34
COMSOL Moderator

Hello Brian Philpot

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Johann Catty
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年9月5日 GMT-4 10:44
Hello,
I'm trying to use Comsol for Acoustic Emission simulation.
Did you find a reply to your problem ?
Did you develop models concerning acoustic emission ? Propagation of AE Waves in solids, liquids, ..
I'm very interested in, and if you can, could you send me some models you developed ?

Thanks in advance,

J. CATTY
AT3,
CETIM,
France
Hello, I'm trying to use Comsol for Acoustic Emission simulation. Did you find a reply to your problem ? Did you develop models concerning acoustic emission ? Propagation of AE Waves in solids, liquids, .. I'm very interested in, and if you can, could you send me some models you developed ? Thanks in advance, J. CATTY AT3, CETIM, France
Stuart Sherlock
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年9月5日 GMT-4 11:34
Hi there,

I am also looking for some information regarding acoustic emission simulations through materials and liquids etc...

Have you had any luck finding information on comsol or any models that may be good to look at?

I would be interested to see what there is out there to give me a heads up before starting my project.


Thanks.
Hi there, I am also looking for some information regarding acoustic emission simulations through materials and liquids etc... Have you had any luck finding information on comsol or any models that may be good to look at? I would be interested to see what there is out there to give me a heads up before starting my project. Thanks.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content