Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

heat transfer with solid mechanics problem

Please login with a confirmed email address before reporting spam

I build a model with heat transfer in solids and solid mechanics, heating from the bottom of the model by adding a high temperature. There's a boundary load set on the top side.
To simplify the question, I add symmetry to both heat transfer and solid physics ,and set a fixed constraint of the center point.
The average element quality of the mesh is around 0.65. In the time dependent case, the study is really hard to converge and the progress graphics is almost divergent.
I was wondering if there would be any constraints I could add to the model.
Thanks!

0 Replies Last Post 2017年3月11日 GMT-5 06:33
COMSOL Moderator

Hello Yu Fan Lin

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.