Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
problem in convergence of phase field model
Posted 2011年2月10日 GMT-5 07:38 Version 3.5a, Version 4.0a 0 Replies
Please login with a confirmed email address before reporting spam
I am runnig simple 2d axi ,case of phase field combilned with heat transfer for modeling evaporation (relatively similar to boiling tutorial) but I have problem with convergence I got error : ' failed to find consistatent initial values ' ' the relative residual is greater than the relative tolerance ' ! I tried for diffrent interface thickness but it did not converged , could any one guide me regarding alternative solution proceduer ? influencing parameters ?
I also tried to model evaporation with ALE but I could not nodel phase change , any suggestion ? same exprience?
Hello Maryam Dadkhah
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.