Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Problems syncing geometry using livelink for autocad

Posted 2017年4月13日 GMT-4 18:15 Interfacing Version 5.2a 2 Replies

Allison
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am trying to build a simple 3D model in Autocad (for simplicity's sake, assume a cube). However, objects can not be parametrized in 3D, so I am confused as to how I am supposed to access dimensions after a 3D object has been built in order to run parameter sweeps when I link it with COMSOL.

Is there a way to livelink a 2D drawing in COMSOL?

Thanks!
2 Replies Last Post 2017年4月19日 GMT-4 12:00
Lorant Olasz COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2017年4月18日 GMT-4 07:02
Hi Allison,

Instead of the solid objects you can create surfaces, for example extruded and planar surfaces. These can be parameterized by setting dimensions on the curves they are based on. The files for the tutorials you will find in the Application Library for LiveLink for AutoCAD have been created this way.
You can generate solid objects from the surfaces after synchronizing them with COMSOL Multiphysics.

Best regards,
Lorant
Hi Allison, Instead of the solid objects you can create surfaces, for example extruded and planar surfaces. These can be parameterized by setting dimensions on the curves they are based on. The files for the tutorials you will find in the Application Library for LiveLink for AutoCAD have been created this way. You can generate solid objects from the surfaces after synchronizing them with COMSOL Multiphysics. Best regards, Lorant
Allison
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2017年4月19日 GMT-4 12:00
Hi Lorant,

Thank you for the response- this really helped! In terms of generating the solids in COMSOL, should I be using the cap faces tool or is there a better way to do this? I started running into some errors when trying to cap certain areas of more complex geometries.

Thanks,
Allison
Hi Lorant, Thank you for the response- this really helped! In terms of generating the solids in COMSOL, should I be using the cap faces tool or is there a better way to do this? I started running into some errors when trying to cap certain areas of more complex geometries. Thanks, Allison

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content