Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Simulation of polymer composite filled with randomly distributed carbon nanotubes
Posted 2017年5月23日 GMT-4 06:42 2 Replies
Please login with a confirmed email address before reporting spam
Hello
I want to study DC electric property and electromagnetic properties of a polymer composite filled with randomly distributed carbon-nanotubes.
My questions are;
1. In 3D model, how can i generate 1000 carbon-nanotubes elements in a polycarbonate (Lxbxh= 10x10x0.4 mm, and Epsilon=3, mue=1, sigma=0) ?
2. How to change the spatial distributions of carbon-nanotube in polymer block?
3. Is it possible to use AC/DC model and frequency domain solver together to study DC conductivity, and S-parameter between 8-18 GHz range.
I am following paper, ''The electrical properties of polymer nanocomposites with carbon-nanotube fillers,'' for modelling of carbon-nanotube in polymer.
Thanks for reply !
Kind regards,
Raj
I want to study DC electric property and electromagnetic properties of a polymer composite filled with randomly distributed carbon-nanotubes.
My questions are;
1. In 3D model, how can i generate 1000 carbon-nanotubes elements in a polycarbonate (Lxbxh= 10x10x0.4 mm, and Epsilon=3, mue=1, sigma=0) ?
2. How to change the spatial distributions of carbon-nanotube in polymer block?
3. Is it possible to use AC/DC model and frequency domain solver together to study DC conductivity, and S-parameter between 8-18 GHz range.
I am following paper, ''The electrical properties of polymer nanocomposites with carbon-nanotube fillers,'' for modelling of carbon-nanotube in polymer.
Thanks for reply !
Kind regards,
Raj
2 Replies Last Post 2017年5月23日 GMT-4 08:55
Please login with a confirmed email address before reporting spam
Posted:
8 years ago
Updated:
8 years ago
See
www.comsol.com/community/forums/general/thread/123442
and
www.comsol.com/community/forums/general/thread/32784
.
We should also have blog post on the subject of creating random geometries with the Application Builder shortly.
Best,
Jeff
www.comsol.com/community/forums/general/thread/123442
and
www.comsol.com/community/forums/general/thread/32784
.
We should also have blog post on the subject of creating random geometries with the Application Builder shortly.
Best,
Jeff
Please login with a confirmed email address before reporting spam
Posted:
8 years ago
Many thanks Jeff !
I will go through the links you shared.
Indeed, There should be some demonstration examples from the published (most cited) papers using the advance features of COMSOL.
Kind regards,
Raj
I will go through the links you shared.
Indeed, There should be some demonstration examples from the published (most cited) papers using the advance features of COMSOL.
Kind regards,
Raj