Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Modeling change in impedance as a particle flows past electrodes?

Posted 2017年6月5日 GMT-4 14:10 1 Reply

Aaron Jankelow
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello, I've been trying to create a model of a coulter counter in a microfluidic device and was wondering if it was possible to model the change in impedance across the electrode as particles flowed past the electrodes. I'm currently using a 2D model and haven't been able to get any reaction in terms of electrical potential when the particles flow through, despite trying many things
1 Reply Last Post 2017年6月5日 GMT-4 15:22
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 2017年6月5日 GMT-4 15:22
Hello Aaron,
This electric impedance sensor example should help you get going:
www.comsol.com/model/electric-impedance-sensor-7704
Best,
Jeff
Hello Aaron, This electric impedance sensor example should help you get going: https://www.comsol.com/model/electric-impedance-sensor-7704 Best, Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content