Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Heat Decay throughout thickness-z axis 20 mm in model
Posted 2017年6月16日 GMT-4 08:00 1 Reply
Please login with a confirmed email address before reporting spam
Hi Everybody,
Its a very simple model, I want to simulate the heat decay (Temp Vs Time) after I heat the geometry to around 520K in 3 mins. Which I was able to simulate and get Temp vs Time plot at any point in my thickness,
But I also want to simulate or see how the temp reduces from 520K (after my 3 min of heating is stopped) for the next 7-10 mins.
Please help me as to how to do that. Really appreciate any help
Regards,
Riya
Its a very simple model, I want to simulate the heat decay (Temp Vs Time) after I heat the geometry to around 520K in 3 mins. Which I was able to simulate and get Temp vs Time plot at any point in my thickness,
But I also want to simulate or see how the temp reduces from 520K (after my 3 min of heating is stopped) for the next 7-10 mins.
Please help me as to how to do that. Really appreciate any help
Regards,
Riya
1 Reply Last Post 2017年6月19日 GMT-4 07:02
Please login with a confirmed email address before reporting spam
Posted:
7 years ago
Dear Riya,
I suggest you address your post directly to support@comsol.com
Best regards,
François
I suggest you address your post directly to support@comsol.com
Best regards,
François