Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to setting "c" coefficient in Coefficient Form PDE
Posted 2017年9月10日 GMT-4 13:24 Studies & Solvers Version 4.3 0 Replies
Please login with a confirmed email address before reporting spam
I am doing find the solution of PDE in COMSOL using Coefficient Form PDE. My PDE equation and its BCs described in my attached image file
My coordinate system in 2D, (X1 for horizontal axis, X2 for vertical axis)
u1: displacement in x1 direction [m], u1 is a function of X1 only.
rho = mass density [kg/m^3]
c66 is constant [N/m^2]
I setup the PDE coefficients like these:
da=alpha=gamma=beta=a=0
f=0
ea=rho
Dependent variables quantity: Displacement field(m)
Source term quantity: None
So my problem is that how to set "c" coefficient? Because in my PDE, it only has d^2(u1)/d(x2^2).
If anyone is free, please see my attached file and give a consultant.
Best regards
Attachments:
Hello NDN
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.