Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

not finding many modelling tools in comsol 4.0

Please login with a confirmed email address before reporting spam

hi,

i have changed my comsol version from 3.2 to 4.0. i am not finding many geometric modeling tools like "mirror image,move and rotate". please help me to find out these tools in v4.0
thank you

best regards
puneet

1 Reply Last Post 2011年3月16日 GMT-4 16:07
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年3月16日 GMT-4 16:07
Hi

the motto in V4 is right click on every node, and dig as deep as possible ;) they are there all (almost) but at 1-2-3 levels down

--
Good luck
Ivar
Hi the motto in V4 is right click on every node, and dig as deep as possible ;) they are there all (almost) but at 1-2-3 levels down -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.