Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Heat transfer in a porous material submerged in water

Posted 2011年3月25日 GMT-4 15:20 MEMS & Nanotechnology, Heat Transfer & Phase Change, MEMS & Piezoelectric Devices, Chemical Reaction Engineering, Materials Version 4.0, Version 4.0a, Version 4.1 2 Replies

Or Gadish
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am looking to do model heat transfer from within a porous polymer disk with water in the pores.

There is no place in the HTPM (heat transfer in a porous matrix) model in which to indicate that the fluid in the pores is water. How do I separate those two functions?
2 Replies Last Post 2011年3月29日 GMT-4 03:13
Francois Gregoire
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年3月25日 GMT-4 16:25
Hi,

Of course there is a place where you can define the fluid properties. Look at the attached jpg.

Look at the equations in the user's guide, the nomenclature is the same as in the interface (for fluid : rho, k, C_p and for the porous matrix: rho_p, k_p, C_p,p). This way you are sure that you enter the right numbers at the right place.
Hi, Of course there is a place where you can define the fluid properties. Look at the attached jpg. Look at the equations in the user's guide, the nomenclature is the same as in the interface (for fluid : rho, k, C_p and for the porous matrix: rho_p, k_p, C_p,p). This way you are sure that you enter the right numbers at the right place.

Attachments:

Or Gadish
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年3月29日 GMT-4 03:13
But there is no place for me to say which material to get the information from. The only way for me to do it is to manually input the data for water, but I want an easy way to be able to change this from water to other media for example without having to go through these particular numbers each time.

Is there another way?
But there is no place for me to say which material to get the information from. The only way for me to do it is to manually input the data for water, but I want an easy way to be able to change this from water to other media for example without having to go through these particular numbers each time. Is there another way?

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content