Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to select parameters for a flow through a 10 cm pipe with helical continuous blades.
Posted 2017年12月24日 GMT-5 15:00 Computational Fluid Dynamics (CFD), Particle Tracing for Fluid Flow, Electrochemistry Version 5.2 0 Replies
Please login with a confirmed email address before reporting spam
In the liquid which is flowing, nano graphite particles is dispersed. The main objective is to get maximum contact of graphite particles with the helical path (holes are provided in the helical path for increasing surface area of contact). The system will be connected to a small pump for ciirculation. As a beginner, how can I approach to this problem?
Please refer to my design attached.
https://drive.google.com/open?id=1TS4U2YvB3QlQkWp4SsaBOHAHdNpSpftN https://drive.google.com/open?id=1mx8RuB0x_mQXz3eiB45pagvzwXbYNzUt https://drive.google.com/open?id=1my2PUZh_fXd7R2DE48-7GU_pWzAbUWJx
Attachments:
Hello VISHNU P
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.