Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Error 8030 when solving problem in simulating air-core photonic crystal fiber

Please login with a confirmed email address before reporting spam

Hello, I am new with COMSOL and trying to simulate air-core photonic crystal fiber with it. Now I am trapped, after I hit the SOLVE PROBLEM button, I got an error 8030 : surface plot failed, cannot evaluate all expressions on any domain, failed to evaluate variables. Can anybody give me a hint what's going on here?

Best,
Lei

1 Reply Last Post 2011年4月8日 GMT-4 01:00
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年4月8日 GMT-4 01:00
Hi

you must learn and read carefully the COMSOL conventions on variables, these have often implicit meanings as some are rather fields depending on x,y,z and/or r,t ... so a variable might not have any meaning on some domains (Entities: domain boundaries ... another important concept to learn, check the doc), ofthen the variables must be integrated to give useful values for us

--
Good luck
Ivar
Hi you must learn and read carefully the COMSOL conventions on variables, these have often implicit meanings as some are rather fields depending on x,y,z and/or r,t ... so a variable might not have any meaning on some domains (Entities: domain boundaries ... another important concept to learn, check the doc), ofthen the variables must be integrated to give useful values for us -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.