Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Material Browser

Posted 2011年4月15日 GMT-4 06:58 3 Replies

Semiramis Badri
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

i am using COMSOL 4.0a, Conjugate Heat Transfer Module. I need to add two materials to my model parts and they are: Carbon and Silica-Alumina, which both I couldn't find in the Material Browser!

Does anybody know how can I add Carbon or another one to my materials?

I would be thankful if anybody could help.

Best,
Semiramis
3 Replies Last Post 2011年4月19日 GMT-4 08:36
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年4月15日 GMT-4 08:58
Hi

you can always add a dummy material (right click Materials node, + add Material) and define the values yourself. Even add them to your "private " material library, see the doc

--
Good luck
Ivar
Hi you can always add a dummy material (right click Materials node, + add Material) and define the values yourself. Even add them to your "private " material library, see the doc -- Good luck Ivar
Semiramis Badri
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年4月19日 GMT-4 07:15
Dear Ivar,

Thanks a lot!
I changed my comsol version to 4.1. and it seems that it has got more complete Material library !
I found carbon fiber/carbon material (in ceramic matrix composites) and selected this material instead of normal carbon.

Again thank you for your kind help.

Best regards,
Semiramis
Dear Ivar, Thanks a lot! I changed my comsol version to 4.1. and it seems that it has got more complete Material library ! I found carbon fiber/carbon material (in ceramic matrix composites) and selected this material instead of normal carbon. Again thank you for your kind help. Best regards, Semiramis
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年4月19日 GMT-4 08:36
Hi

do not forget then to patch to latest update, see the main COMSOL site (I'm currently in 4.1.0.185) and do an update Model Library to get the latest there too

--
Good luck
Ivar
Hi do not forget then to patch to latest update, see the main COMSOL site (I'm currently in 4.1.0.185) and do an update Model Library to get the latest there too -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content