Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Fluid Flow

Posted 2011年4月24日 GMT-4 01:55 Version 4.1 2 Replies

Mansur Ermila
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi every body,

I'm a new user for COMSOl. I learned how to model 2D single phas fluid flow in a parallel plates. Can I model two fluids moving in a parallel plates using COMSOL (The denser fluid displacing lighter one)? and how?

Your help is highly appreciated.
2 Replies Last Post 2011年4月24日 GMT-4 22:28
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年4月24日 GMT-4 03:12
Hi

In the FLuid FLow module, you have the multi-phase flow, in particuler two phase level set and phase field

--
Good luck
Ivar
Hi In the FLuid FLow module, you have the multi-phase flow, in particuler two phase level set and phase field -- Good luck Ivar
Mansur Ermila
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年4月24日 GMT-4 22:28
Thank you so much Sir. I get it.
Thank you so much Sir. I get it.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content